*you can create these jump rings by opening links of the medium knurled antique copper chain, this project uses approximately 11 inches of chain to create 28 jump rings.
- Chain nose pliers
1. To turn the chain into jump rings use your chain nose pliers to gently open each chain link and remove it from the chain. Continue until you have created 28 jump rings.
2. With your chain nose pliers open the square jump ring and thread it through the lobster claw and one hammered ring. Close jump ring securely.
3. With your chain nose pliers loop one knurled jump ring around two hammered rings. Close securely. Repeat until you have 7 knurled jump rings closed around the two hammered rings. Repeat to attach all hammered rings. Close bracelet by hooking lobster claw around one hammered ring as shown.